10 Best Low Profile Floor Jack Review 2023 (Great For Emergency Lifting!)

Are you looking for the best low profile floor jack suitable for you?

Generally, no one wants to run into a poor quality hydraulic jack again and we know you don’t want to either.

It is enough to have your car damaged in the middle of the road, but having a bad jack at the same time is quite unbearable.


Best Low Profile Floor Jack Review [User’s Recommended]

Sunex [2 Ton]
Torin [1.5 Ton]
Performance Tool[3 Ton]
Pro-Lift [2 Ton]
Pittsburgh Automotive[3 Ton]
Neiko Pro[3 Ton Capacity]
BIG RED [2.75 Ton]
BIG RED [3.5 Ton]

What is the best hydraulic jack?

Based on the criteria used in our research, the Sunex 6602LP floor Jack stands out as the best floor jack available on the market.

Why Sunex 6602LP Floor Jack is the best floor jack?

We chose the Sunex 6602LP 2 Ton Low Rider Steel Service Jack as the best floor jack due to its durable material and load capacity which allows it to resist greater weights.

Let’s get right into the comparison…

Top 10 Best Low Profile Floor Jack For Trucks/Suv/Car: Buying Guide

01. Sunex 6602LP Floor Jack- Best low profile floor jack: Best 3 ton floor jack


Highlighted Features

  • Rapid rise technology
  • Low clearance, ideal for sport cars
  • Lift height of up to 24 Inches
  • Quick-release handle for easy storage
  • Consistent low profile design

Sumex presents a hydraulic jack made of aluminum and steel.

One major advantage of this jack is its ability to support up to 3 tons for long periods.

It conveniently provides its consumer with a minimum lift of 100 millimeters to a maximum ground clearance of 460 millimeters;

so we consider that it is a sufficient height and weight to lift small and medium-sized cars.

In addition to the above, this is a product that has wheels for quick and easy transportation anywhere.

Sumex presents us with an excellent product as it has TUV and GS approval, which means that it meets the quality and safety expectations established by the European and American governments.

We consider this to be an excellent quality product as it offers a wide variety of benefits.

One of the most important is its approval since we can be completely sure that it is a quality product that will leave us out of any danger that may exist.

Besides that, its compact design is ideal to be able to store it anywhere in the car since it can go unnoticed at all times.


  • Made with excellent quality products
  • Supports a good amount of weight
  • Features an important homologation


  • wheels may cause instability

02. BIG RED T815016L Torin Hydraulic Low Profile Jack: best floor jack for SUV


Highlighted Features

  • Lightweight Design
  • Quality performance at its best
  • Front wheels for added stability
  • Lifting range of up to 14”
  • Foam bumper for vehicle protection

Torin offers us a fairly complete product in the market.

It is one of the most demanded products due to its subjection to flat terrain as it does not wobble or dance on the surface itself.

Moreso to that, it comes with a handy side handle that allows you to easily lift and move the jack.

This hydraulic jack offers a minimum lift of 3.5” and a maximum clearance of 14”.

So it becomes a perfect product for professional workshops since it offers a wide variety of benefits that are very useful for professionals who know and can get the most out of it.

The hydraulic jack presented by the Torin brand is the result of a group of different types of jacks such as the bottle jack, the scissor jack, the lifting jack, among others.

This is why it serves as an excellent alternative for professional workshops as it has many uses.

Besides that, this product is characterized by providing a great variety of cutting, clamping, and assembly tools; without a doubt, it is a product that offers many benefits to its users.


  • Good quality and durable materials
  • Offers a good distance for arrangements
  • Features a completely stable base


  • Required continuous maintenance

03. Torin TAM815016L Hydraulic Low Profile Floor Jack- Best floor jack below 2 tons


Highlighted Features

  • Durable Aluminum construction
  • Lift range of up to 14 inches
  • Lightweight design
  • Foam bumper for vehicle protection
  • Safety Overload system

The main feature for which this product stands out and for which it has been able to win a spot on this list is its hydraulic pump piston.

Its hydraulic pump piston helps to effortlessly raise the lift arm.

In addition to the above, this product is ideal for low vehicles, so repair or change of tires for low vehicles will not be inconvenient with this hydraulic jack.

As with some other lifting jacks on our list, this product has CE approval.

This product may not be the best, but without a doubt, it is a product that has been manufactured under strict standards so that it can comply with the safety regulations.

This hydraulic jack can support up to 3 tons of weight.

This and many other features make it a professional level product.

Besides, you do not necessarily need to have extensive knowledge and experience within the automotive sector to be able to use this product properly.

Another positive point is that it is not a very large product, so you can take it in your car.

This will save you from inconveniences or breakdowns that can happen.


  • Comes with professional features
  • Comes with CE approval
  • Made with quality materials


  • Requires proper maintenance

04. Performance Tool W1645 Low Floor Jack


Highlighted Features

  • Rubber Saddle pad
  • Lifting capacity up to 3.5 tons
  • Lift range of up to 20 inches
  • Quick lifting with a double pump mechanism
  • Overload protection

The Performance tool is a brand that seeks to provide its users with excellent quality products.

The W1645 is a product that stabilizes correctly on flat surfaces making it easy to use.

Besides that, another advantage that the W1645 presents is its capacity to lift 2 or 3 tons.

The materials with which this product is manufactured are aluminum and stainless steel, which allows it to provide long useful life to its users.

We can also highlight the fact that it is light in weight, so you do not have to always leave it in the garage.

You can take it anywhere you want to help you in the worst moments.

Performance tool offers a product on the market that, although it is not of the highest range, is an excellent option if you have a car that does not weigh more than 2 tons.

Its price is not too excessive if we compare it with other types of hydraulic jacks.

So if you want to acquire a good quality product at a relatively low price, this is the product you need in your home or mechanics.


  • Its base provides excellent stabilization
  • Offers equivalent value for money
  • Made from durable materials


  • Jack cases are made from plastic
  • Oil is prone to leakage

05. Pro-Lift F-767 Grey Low Profile Floor Jack- Best floor jack under $100


Highlighted Features

  • Extra low profile
  • Lift range of up to 14 inches
  • Features Heavy-duty steel construction
  • Prevents Overload using a Safety valve
  • Faster lift mechanism

Pro-Lift is a brand that provides models of hydraulic jacks with very good quality.

This model is not an exception but rather looks like an update or modernization.

This product allows you to lift a small or medium-sized car a total distance of 14 inches, which according to experts in the field is sufficient for basic repairs.

However, this product has maintained its bearing capacity compared to the previous model, since the maximum weight that this hydraulic jack can support is still 2 tons.

Despite this, this product mashed up with efficiency and durability.

Despite being a low profile floor jack, this product works quite well as a hydraulic jack.

It serves as a perfect alternative for those who are looking for something of quality.

Its capacity to support 2 tons at first glance may seem simple but the truth is that it is more than enough for people who own a medium or small car.


  • Made with quality materials for increased durability
  • Perfect product for professionals and amateurs
  • Holds a good amount of weight


  • May not be suitable for SUVs
  • Requires frequent maintenance

06. Pittsburgh Automotive Low Floor Jack


Highlighted Features

  • Increased stability with extra-wide steel casters
  • Precise load control
  • Rapid pump lift
  • Super-strong and durable design
  • Lift range of up to 14 inches

Pittsburgh is privileged in this ranking because many motorists consider it to be one of the best brands of hydraulic jacks.

This reputation is confirmed on this model which can lift cars weighing 3 tons.

It also comes with a handle that can turn through an angle of 360° to provide convenience at all interventions.

The equipment is designed to be easy to handle so that lifting your automobile is no longer restrictive.

To do this, the manufacturer has integrated swivel wheels on this model.

You will also have at your disposal an ergonomic handle which is located at the lever.

When using the tool there is very little risk of scratching the car as it comes with a rubber sole.

Many motorists choose to buy this item since it can easily and quickly lift a vehicle that weighs 3 tons reaching a height of up to 14 inches.

This product simplifies all lifting operations thanks to its rotating handle, swivel wheels, and comfortable handle.


  • good lifting range
  • Works well to lift SUVs
  • Suitable for professional use


  • Prone to oil leakage

07. 620479E Xtra Low Floor Jack by Powerbuilt


Highlighted Features

  • Low profile jack for cars as low as 3 inches
  • Steel safety bar to secure the jack when raised
  • 2 tons of lift capacity
  • Lift reach of up to 15 inches
  • Ergonomic handle for a comfortable grip

To efficiently lift cars, it is essential to acquire the most efficient jack.

This Powerbuilt 620479E Xtra Low Profile Floor Jack could be a perfect choice for you especially if you work as a professional.

Being compliant with several standards such as CE and GS, the jack guarantees safe use.

With regards to its design, the device is made solely from quality materials such as steel or superior plastic which provide the necessary strength to the whole.

Thanks to its design, this item can conveniently lift 2 tons of weight. This floor jack can reach heights of up to 15 inches.

You can easily choose this product without having to compare it with others since it is built according to the CE standards.

Also, it is made from strong materials including steel, as well as high-quality plastic.

As mentioned earlier, the quality of this low profile jack allowed it to conveniently lift cars weighing up to 2 tons.


  • Made from high-end materials
  • Excellent for low cars
  • Offers great scratch resistance


  • Tends to lower down after long use
  • Oil leakage may occur

08. Neiko Pro 20272B floor Jack


Highlighted Features

  • Lifting capability of up to 3 tons
  • Dual plunger for quick lifting
  • Safety valve to prevent overload
  • Rubber pad to protect vehicles
  • Swivel casters for easy transport

The Neiko Pro 20272B is another Premium Low Profile Aluminum Floor Jack capable of supporting as much as 3 tons of weight.

This product lifts cars at an incredible speed thanks to its dual plunger structure for a quick response.

Also, it features an overload valve which greatly impacts its efficiency and prevents overload.

Complying with CE standards, this low profile jack guarantees safe use.

Indeed, it comes with a rubber pad that protects the bottom of the car throughout use.

Also, a protective foam has been integrated into the tube so that it is completely reliable.

With a weight of just 57 pounds, this tool is easy to move about.

To ease its mobility even further, the Jack features swivel caster wheels which also aid its positioning.

With regards to efficiency, it’s lifting time is greatly reduced, because this device is equipped with a double piston.

Also, it comes with an overload valve to optimize the intervention.

As for safety, this jack is designed to respect your car thanks to the presence of the rubber sole as well as the protective foam inside the tube.

Despite its heavyweight, this material is particularly maneuverable with integrated wheels.


  • Suitable for sedans, SUVs, and other vehicles
  • Easy to maneuver
  • Safe to use


  • Slightly expensive

09. BIG RED T82751 Torin Pro Series Hydraulic Floor Jack


Highlighted Features

  • 360 degrees swivel casters for easy movement
  • Easy storage with foldable handles
  • Lifting range is up to 19 inches
  • Lifting capacity of 2.75 tons
  • Increased stability with a wide stance

This device is designed in accordance with safety standards while benefiting from the high quality of its design.

This low-profile jack offers reliability and safety with its overload valve which prevents it from lifting excess weight.

The BIG RED T82751 has a lift capacity of about 2.75 tons which is suitable for low vehicles.

When it comes to its maximum lifting height, the BIG RED T82751 can stretch as high as 19 inches.

The floor jack has an ergonomic design that makes it easy and comfortable to handle while in use.


  • A durable and sturdy device
  • good lifting range
  • Suitable for pick up vans


  • No lowering control

10. BIG RED T83505 Torin Pro Series Hydraulic Low Profile Floor Jack- Best for heavy-duty lifting


Highlighted Features

  • Premium quality construction
  • Dual pump for quicker lifts
  • Rust resistance
  • Lift capacity of 3.75 tons
  • Lift height up to 22 inches

For those who need a heavy-duty hack then the BIG RED T83505 Torin Pro Series will serve as a good choice.

Having obtained CE and GS certifications, this product can carry a load weight of 3.75 tons.

This floor jack can lift cars as high as 22 inches which happens to be the highest on our list.

Being able to operate at optimal temperatures, this not so expensive tool shows an optimal resistance.

Despite its huge size, one can easily maneuver this floor jack thanks to its casters, which help improve mobility.

Not to mention, it features an ergonomic handy which greatly improves comfort.


  • Comes with a great lift range
  • Offers good value for money
  • Suitable for professional use


  • Prone to factory malfunctions
  • Leaks oil after multiple uses

How To Choose The Best Low Profile Floor Jack: Buying Facts

Now that you are aware of the different floor jacks on our list, we will explain in detail the different criteria to take into account to choose correctly.

Lifting capacity

Also called load capacity, this is a safety criterion.

Remember to check the weight of your vehicle to see if the jack you want to buy will be able to lift it. Check the maximum lift of your jack.

If you do not know precisely the weight of your vehicle, you can assume that for a standard vehicle, a capacity of 2 tons will be sufficient.

Of course and we insist on this point, it will always be necessary to ensure additional security with candles for example.

For some utilities, it is recommended to be able to lift between 3 tons and 6 tons.

On average, a floor jack will be used for vehicles between 1 ton and 3 tons. For heavier vehicles, we recommend that you look for a good bottle jack.

Lifting height

We have said it often during this comparison, but it is essential to pay attention to the height between the ground and your vehicle.

Depending on your interventions, you will also have to raise your vehicle higher or lower.

In the case of changing a wheel, for example, it is not necessary to lift your car very high.

Ideally, if you are thinking of doing mechanical work, we recommend that you opt for a height of at least 19 inches.

To summarize, you have to take into account the height of the chassis and your need for intervention on the vehicle.

The quality of the materials

Depending on your frequency of use, we recommend that you take into account the quality of the materials used.

For frequent use, it will be necessary to turn to steel for example.


This criterion, like the previous one, is especially important if one takes into account regular use.

Your low profile hydraulic jack will be more pleasant and less dangerous if it is stable.

The price

Of course, if you are here it is because you are looking for the best value for money.

Let me tell you, it doesn’t matter if we convinced you to buy one of our products.

This kind of tool is not to be taken lightly. It is better not to play with safety when working under a vehicle weighing several tons.

It may be better to pay a little more, especially if there is any doubt about the quality of a product.

The frequency of use is also to be taken into consideration. To put it simply, we found that jacks below $150 were mainly aimed at individuals.

For professionals, the prices observed generally oscillate around $200. In conclusion, brands sometimes provide a storage case.

The Best Hydraulic Floor Jack For Truck: People’s Online Queries

How to use a low profile jack

The floor hydraulic jack is used to lift a car during a mechanical intervention or replacement of a wheel.

You should know that each model has its load limit. When making your purchase, remember to check this point.

This will allow you to avoid unexpected accidents while using it.

An overload can indeed damage your hydraulic jack and injure you at the same time.

Furthermore, during an intervention, the car and the jack should preferably be placed on level ground.

This is necessary because rough surfaces do not guarantee the stability of your car.

The latter must also be immobilized by the handbrake to avoid accidents.

To strengthen the brake system, place compact, hard blocks of material to lock the wheels on the non-lifted side.

Regarding equipment, always check the hydraulic jack before each use. Sometimes a quantity of air circulates through its hydraulic system.

This can cause the equipment to malfunction which could suddenly release its lift system.

To resolve this problem, you will need to bleed the air in the hydraulic system.

The operation of a hydraulic jack is ensured by a special liquid whose characteristics are to be requested from a specialist dealer.

So do not use brake fluid or the like instead so as not to affect the performance of your jack.

Also, to avoid any kind of complication, a jack should not be used if some parts are missing or worn.

How to properly lift a car using a hydraulic floor jack?

Under a car, there are four solid parts specially designed for lifting with a jack.

These fulcrums are located next to each wheel.

First of all, place the jack under the support of your car in a perpendicular manner and make sure that it and the vehicle do not risk slipping during the intervention.

After that, it is necessary to lock the purge valve by turning the handle clockwise.

Once this step is completed, you will be able to pump the jack until it reaches the height you need.

While lifting the car, you will also need to make sure that the collar is placed correctly on the fulcrum or the car may slip.

You should know that the jack should not be the only tool used to keep the car elevated.

After the procedure, you must first remove the candle if you have used it.

Then, slowly unscrew the purge valve counterclockwise.

You should know that the speed of the descent will depend on how you turn this valve.

Once your car’s wheels hit the ground, continue to open the valve so that the lift arm is positioned down.

Only then will you be able to safely remove your hydraulic jack.

How to maintain your hydraulic jack?

Always take care of your hydraulic jack to ensure its longevity and maintain its performance.

First of all, the tool should be lubricated once a month with special jack oil.

To do this, you need to open the bleed valve counterclockwise and point the lift arm down.

Then remove the filler cap so that you can pour oil into it.

After that, reinstall the filler cap so that the air cannot reach the hydraulic system.

For the jack to work perfectly in this case, it is necessary to carry out regular lubrication of its moving parts once or twice a month, but this also depends on the frequency of use.

On the other hand, it should be noted that the lifting piston rod must not be greased.

When you are not using your hydraulic jack, the lift arm should always face down.

The handle must also keep a horizontal position. If you prefer to store your jack in your garage, make sure it is resting horizontally on the ground.

Also, to avoid rust, it should be placed in a dry place. Sometimes it can also happen that the jack is covered with oil.

At this point, it will have to be cleaned manually with a simple cloth. High-pressure washing is strictly not recommended.

How to bleed a rolling hydraulic jack?

The different steps to perform the purge are often mentioned in the instructions.

This intervention is not complex, but only requires a lot of patience.

In general, it is divided into three stages. To begin with, you must empty all the oil contained in the jack.

To do this, you need to remove the rubber stopper, the color of which varies from one product to another.

In the next step, you will need to pour in new oil and put the plug in place.

It is strongly recommended to use Hydro oil. Finally, you need to open the descent screw and pump at least once.

The steps to follow are the same if you do not yet know how to bleed a hydraulic cylinder jack.

How to repair a hydraulic floor jack?

The first thing to do is to check the oil filler cap to make sure it is in place.

Once it’s done, you can move on to replacing the old oil. To do this, it is essential to release the valve drive and remove the cap.

You will then need to top up the oil and change the plug.

You must then open the relief valve so that the air inside the hydraulic chamber escapes.

Lubrication of all moving components is recommended. The replacement of defective parts is also necessary.

Then you need to fully and slowly open the relief valve.

The principle behind hydraulic floor jacks

 Designed for low cars, this type of hydraulic jack adopts the same operation as a bottle jack.

However, it differs by its design, because it is mounted above fixed support.

It thus makes it possible to lift cars that weigh as much as 3 tonnes thanks to the jack. It can be used to replace an original car jack.

Moreover, its use is not limited to lifting since it can also be adopted to serve as a shoring beam or even a floor.

How to fill a hydraulic jack?

First, put the jack in an upright position on a flat surface.

You must then use the end of the socket handle to turn the relief valve counterclockwise.

It will then be necessary to press strongly on the level of the piston and the saddle of the jack.

Using a flat blade screwdriver, remove the oil fill cap.

After that, you need to fill the reservoir with hydraulic fluid.

In the next step, you will have to put the cap back in place and wipe off any oil residues that have spread outside the cylinder with a clean cloth.

Conclusion of Ultra Low Profile Floor Jack

With your own low profile floor jack, you no longer have to worry so much about lifting your low leveled vehicle.

Repairs on your car can be done conveniently even at home, saving you a lot of money.

It is important to know what to look for in a floor jack.

Surely, our review will help you gather more knowledge and will allow you to compare different brands of floor jacks.

Also, it allows you to make an informed decision based on bearable compromises and essential needs.

Now that you know all the basics, you can go ahead and select the best low profile floor jack for you.

georgelawsongallery.com is a participant of the Amazon Affiliate program. We may earn a small commission if you purchase through our recommended links. More details.

Leave a Comment